Fuel rail heat shields prevent the fuel rail from absorbing radiant heat into the fuel delivery system. This will improve performance and help reduce instances of pre-ignition. In addition to keeping the fuel headed to the motor cool, it will also help the fuel returning to your fuel cell to remain cool. Over a long distance race, keeping fuel temps down returning to the fuel cell can be almost as vital as keeping the fuel delivered to the motor cool. Warm fuel returning to the fuel cell will heat up the fuel in the cell, and cause it to boil off some of the chemicals that are in your fuel. This changes the chemical balance of your fuel and greatly affects your previously tuned settings. Keeping fuel cool helps to preserve the chemical balance of the fuel and keeps your vehicle operating at maximum efficiency!
Additional Attributes:
GTIN: 00819825014495
Color: Silver/aluminum
Conductivity Warning: Caution this material is electrically conductive; be sure to insulate any terminals that might come in contact with this product.
Install Tips: Tape
Instructions Included: Yes
Insulation Type: Radiant heat barrier, needs 1 inch of air space, should not contact heat source.
Manufacturer Product Link: https://www.heatshieldproducts.com/fr-shields
Material: Aluminum/Fiberglass
Operating Temperature: 1100F
Peak Temperature: 2000F
Product Dimensions: 6 in x 18 in
Prop 65 (C, R or CR): CR
Prop 65 – Short Label: Prop 2065CA.pdf
Prop 65 Warning Chemical Listing: WARNING: This product can expose you to lead, a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Prop 65 Yes/No: Yes
Safety Equipment Warning: Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product.
Extended Information:
Emissions : 4
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 8 x 4.75 x 2.5 inches
Weight: 0.2 PG
There are no reviews yet.