Whether you are out on the strip, track, or in the desert, it is imperative to protect your expensive race fuel that enables your vehicle to reach maximum performance. HP Cool Can Shields are fabricated from a light-weight aluminized material that act as a UV heat shield for your fuel can or utility jug and protects its contents from solar radiation. This keeps your race fuel cool, preventing fuel evaporation and keeps the fuel’s chemical balance intact. Race fuels are comprised of 100’s of chemicals, some burn off quickly at lower temps. A hot can sitting out in the sun and burn off the these chemicals. This changes your fuel’s chemical composition, not that car or bike you had dialed in at your shop has different chemical balance of fuel running through it! This can adversely affect your vehicles performance, and give your competitors an edge. Utility jugs covered with our heat shields have cooler fuel temperatures by as much as 20 Degrees F vs. unprotected sun baked fuel containers. In addition to fuel protection, the HP Cool Can Shields will also increase your can’s life expectancy by 50% by preventing sun damage.
Additional Attributes:
GTIN: 00819825013672
Color: Silver/Aluminum
Conductivity Warning: Caution this material is electrically conductive; be sure to insulate any terminals that might come in contact with this product.
Install Tips: Slide on
Instructions Included: No
Insulation Type: Solar radiation heat shield
Manufacturer Product Link: https://www.heatshieldproducts.com/hp-cool-can
Material: Aluminized Mylar
Operating Temperature: 250F
Peak Temperature: 500F
Product Dimensions: VP Round 5 Gal
Prop 65 Yes/No: No
Static Warning: Caution static electricity can cause fires or explosions near fuel, be sure container is properly grounded before filling with fuel.
Extended Information:
Emissions : Announced
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 18 x 8 x 0.25 inches
Weight: 0.44 PG
There are no reviews yet.